meta-pixel-view
Background image

E/One Grinder Pump Service in Lago Vista, TX

Licensed & insured · Texas Responsible Master Plumber RMP44420 · TDLR AC Contractor TACLA22663C · Family-owned since 2018

Call us

E/One Pump Alarm On? Stop the Water, Then Call Us

An E/One grinder pump station is a sealed tank at your house with a pump core, a level sensor and an alarm panel inside. It grinds your wastewater and pushes it through a small pressure line to the sewer main. E/One is short for Environment One, and you will also see it written E-One. Real Texas Plumbing is a licensed, family-owned company in Lago Vista that repairs, services and replaces E/One pumps around Lake Travis. Our shop is at 20811 Dawn Dr in Lago Vista, we have a second shop in Lakeway, and you get a written price before any work.

Is it an E/One? How to tell

Look for the E/One name on the alarm panel box and on the tank lid. If you cannot find it, call or text us a photo of the panel and the lid and we will tell you what you have. Your builder paperwork or your sewer provider may also say.

Alarm light or buzzer? Do this first

Stop using water. No showers, laundry or dishwasher, and do not flush. The alarm means the water in the tank has risen higher than it should, so the pump is not running or cannot keep up.

Check the breaker. If the pump's breaker has tripped, reset it once. If it trips again, leave it off and call us.

Leave the lid closed. The tank holds wastewater and the pump is wired to high-voltage power, so this is not a do-it-yourself look.

Call or text us at (512) 662-2949. If sewage is backing up into a tub or coming out near the tank, say so right away, because those calls get priority. If it happens after hours, keep the water off and call when the office opens at 7:30 a.m. on weekdays or 8 a.m. on Saturday. We do not send plumbers out overnight. For more on alarms, see grinder pump alarm repair.

What usually causes an E/One alarm

An alarm is a symptom. The causes we check include:

  • A tripped breaker or a power problem

  • A pump core that has jammed or failed

  • A level sensor that is not telling the pump to run

  • A check valve that is stuck or leaking water back into the tank

  • A blocked or damaged discharge line

  • More water than the pump can move, for example from a running toilet or a leak

If the pump runs all the time instead, see why a grinder pump runs constantly.

What we repair on E/One stations

We repair, service and replace E/One pumps, including the pump core, level controls, check valve and alarm panel. Many alarm calls turn out to be a repair, a level-sensor fix or a core swap, which costs far less than replacing the whole station. We show you what we found and give you the price before we start.

Repair or replace? How we decide

We start with what the system is doing: the panel and alarm, the breaker, the level sensor, the wiring, the pump's electrical draw, the check valve and the discharge line. Then we show you what we found and give you written options.

A station usually needs replacing when the motor or seals have failed, the same pump has failed more than once, the repair price is close to the price of a new pump, or the pump runs but cannot move wastewater the way it should. It usually does not need replacing for a stuck level sensor, a failed check valve, a tripped breaker or a blocked discharge line. Those are repairs. For replacement details, see grinder pump replacement.

What does E/One service cost in Lago Vista?

Grinder pump repair and grinder pump alarm repair start at $750. Most full replacements in Lago Vista run $7,500 to $12,000 installed. Where a job lands depends on the station model, the tank depth, how far the discharge line runs to the main, and whether the control panel failed too. A $65 trip charge covers the visit and is credited toward the work when you go ahead, and you get a written price before we start.

Who owns the pump, and who owns the main

In Lago Vista and The Hollows, you own the pump, the tank, the alarm panel and the line to the city main, and the City of Lago Vista maintains the main. In Lakeway, Lakeway MUD runs the sewer main, but the station at your home is yours to maintain. Either way, a repair or replacement at the house is your cost, which is why a written price matters. For a plain-English guide, see understanding grinder pumps in Lago Vista, or if you are buying or selling, buying or selling a home with a grinder pump.

Is your E/One still under warranty?

If your pump is new or was replaced recently, check the warranty terms or call E/One before any repair. The manufacturer can have its own rules about who may service a pump under warranty, and we will not guess what your warranty covers. Tell us when you call and we will go over your options with you.

What to keep out of an E/One system

Only toilet paper goes down the toilet. Wipes, even the ones marked flushable, plus paper towels, clothing, feminine products and grease can jam the pump core and clog the small pressure line, and they are a common cause of grinder pump failure. Keep the lid and the panel clear, and know which breaker feeds the pump.

E/One and Liberty pumps around Lake Travis

In Lakeway, most low-pressure sewer connections use an E/One station. Around Lake Travis we also work on Liberty grinder pumps, which you can read about on our Liberty Pumps page. Many homes around the lake sit on limestone above the water, where wastewater cannot run downhill to the sewer, so a grinder pump pushes it uphill. Whether you can switch from one brand to another depends on your system and your community's rules, so we check that before we quote a replacement.

Where we service E/One pumps

We service E/One pumps across Lago Vista, including Highland Lake Estates, Bar-K Ranches, Tessera, Lakeshore Ranch, Waterford on Lake Travis, Marshall's Point, Montechino and North Shore Colony. We also serve Jonestown, The Hollows, Point Venture, Northshore on Lake Travis, Bee Cave, Hudson Bend, Leander, Cedar Park and Georgetown, with a second shop in Lakeway, and we serve homes across Greater Austin. Our Lago Vista shop is at 20811 Dawn Dr, Unit 706, Lago Vista, TX 78645. For repairs and replacement on any grinder pump, see our grinder pump service page. Call (512) 662-2949 Monday to Friday, 7:30 a.m. to 8 p.m., or Saturday, 8 a.m. to noon.

Our E/One Pump Service Process

Four steps, from the first call to a full test cycle.

You Call or Text

Tell us what the panel is showing, whether the alarm is on, and whether anything is backing up. Keep the water off. A $65 trip charge applies and is credited toward the work.

1

We Diagnose the Station

The plumber checks the panel, breaker, level sensor, pump core, check valve and discharge line to find out why the pump is not keeping up.

2

You Get Options in Writing

We show you what we found and give you a written price for each option, repair or replacement, before any work starts.

3

We Fix It and Run a Full Cycle

We make the repair or replacement, then run the pump through a full cycle to confirm it starts, pumps down and shuts off the way it should.

4
FAQ

E/One Grinder Pump FAQs

Straight answers from a local plumber about E/One pump alarms, repairs and replacement in Lago Vista and around Lake Travis.

What Our Customers Say

Read what homeowners say about working with Real Texas Plumbing.

Talk to a Local Plumber About Your E/One Pump

Licensed, insured and family-owned in Lago Vista since 2018. You get a written price before we start.

Call us