meta-pixel-view
Background image

Liberty Pump Service in Lago Vista, TX

Licensed & insured · Texas Responsible Master Plumber RMP44420 · TDLR AC Contractor TACLA22663C · Family-owned since 2018

Call us

Liberty Pump Alarm On or Water Rising? Start Here, Then Call Us

Liberty Pumps makes sump, sewage ejector and grinder pumps, and Real Texas Plumbing repairs, services and replaces them for homeowners in Lago Vista and around Lake Travis. These pumps move water or wastewater from a low spot up to where it can drain: out of a sump pit, up from a lower-level bathroom, or out through a small pressure line to the sewer. When one stops working, the cause is often a float switch, a check valve, a jammed impeller or a breaker, and many of those are repairs. We are licensed and family-owned, our shop is at 20811 Dawn Dr in Lago Vista, we have a second shop in Lakeway, and you get a written price before any work.

Is it a Liberty? How to tell

Look for the Liberty Pumps name on the pump's label, the cord or the control panel. If the pump sits in a closed basin and you cannot read it, call or text us a photo of the lid and any panel, plus any paperwork from the builder or the last plumber, and we will help you work out what you have. Please do not open a sewage basin yourself.

Which kind of Liberty pump do you have?

Most homes have one of three types, and each does a different job:

  • Sump pump: removes groundwater or rainwater from a pit. See our sump pump installation page.

  • Sewage ejector pump: lifts wastewater from a lower-level bathroom, laundry or wet bar up to the sewer line. See sewage ejector pump service.

  • Grinder pump: grinds solids and pushes wastewater through a small pressure line to the sewer main. See grinder pump service.

Alarm sounding or water rising? Do this first

Stop using water if it is a sewage ejector or grinder pump. No showers, laundry or dishwasher, and do not flush. The alarm means the basin is filling faster than the pump is emptying it.

Check the power. Look at the pump's breaker and, if it plugs into an outlet, whether that outlet or GFCI has power. Reset a tripped breaker once. If it trips again, leave it off. If there is standing water near an outlet or cord, do not touch it and call us.

Leave the lid closed. A sewage basin holds wastewater and gas, and the pump runs on line voltage, so this is not a do-it-yourself look.

Call or text us at (512) 662-2949. Tell us what the pump is doing and whether water or sewage is backing up, because those calls get priority. If it happens after hours, keep the water off and call when the office opens at 7:30 a.m. on weekdays or 8 a.m. on Saturday. We do not send plumbers out overnight. For grinder pump alarms, see grinder pump alarm repair.

What usually stops a Liberty pump

A pump that will not run, or runs and does not move water, usually comes down to one of these:

  • A tripped breaker, GFCI or other power problem

  • A float switch that is stuck, tangled or worn out

  • A jammed or clogged impeller

  • A check valve that is stuck or failing, so water flows back into the basin

  • A blocked or damaged discharge pipe

  • A worn-out motor

If a grinder pump runs all the time, see why a grinder pump runs constantly.

What we repair and replace

We repair, service and replace Liberty pumps, including float switches, check valves, controls and the pump itself, and we install new sump pumps, sewage ejector pumps and grinder pumps. Many calls turn out to be a repair, such as a float switch or check valve, which costs far less than a new pump. We show you what we found and give you the price before we start.

Repair or replace? How we decide

We start by finding out why the pump stopped: the power, the float switch, the impeller, the check valve, the discharge line and the condition of the motor. Then we show you what we found and give you written options.

A pump usually needs replacing when the motor has failed, the same pump has failed more than once, the repair would cost close to a new pump, or it runs but cannot lift water the way it should. It usually does not need replacing for a stuck float, a failed check valve, a tripped breaker or a clogged discharge pipe. Those are repairs.

What does Liberty pump service cost in Lago Vista?

Grinder pump repair starts at $750, and a full grinder pump replacement in Lago Vista usually runs $7,500 to $12,000 installed. Sump pump and sewage ejector pump work is priced job by job, because it depends on the pump, the basin or pit, the discharge pipe and how easy the pump is to reach. A $65 trip charge covers the visit and is credited toward the work when you go ahead, and you get a written price before we start.

Matching the pump to the job

The right pump depends on what it is moving and how far it has to push it. We look at what goes into the basin (groundwater, wastewater or solids), how high the water has to lift, how long the discharge line runs and the size of the basin. A pump that is too small keeps running and wears out early, and a pump that cannot handle solids will jam. That is why we check the system before we quote a replacement, instead of swapping in whatever fits the hole.

Is your Liberty pump still under warranty?

If your pump is new or was installed recently, check the warranty terms or call Liberty Pumps before any repair. A manufacturer's warranty can have its own rules about how the pump was installed and who may service it, and we will not guess what yours covers. Tell us when you call and we will go over your options with you.

What to keep out of the pit or basin

For sewage ejector and grinder pumps, only toilet paper goes down the toilet. Wipes, even the ones marked flushable, plus paper towels, clothing, feminine products and grease can jam the impeller and clog the discharge line. For a sump pump, keep gravel, mud and debris out of the pit and keep the float free so it can rise and fall.

Keep it working

Once or twice a year, check a sump pump by slowly pouring a bucket of water into the pit. The float should rise, the pump should start, empty the pit and shut off. Do not do this with a sewage ejector or grinder pump. Listen for new noises, running that goes on too long, or an alarm that comes on and goes off, and call us early. Our Real Home Care membership is $45 a month and includes priority scheduling, a waived trip fee and 10% off repairs.

Liberty and E/One pumps around Lake Travis

Around Lake Travis you will see both Liberty pumps and E/One stations, and we work on both. Many homes in Lago Vista and The Hollows use grinder pumps, and some homes in the hills around the lake have a lower-level bathroom, laundry or wet bar that needs a sewage ejector. If you have an E/One, see our E/One grinder pump service page. Whether you can switch from one brand to another depends on your system and your community's rules, so we check that before we quote a replacement.

Where we service Liberty pumps

We service Liberty pumps across Lago Vista, including Highland Lake Estates, Bar-K Ranches, Tessera, Lakeshore Ranch, Waterford on Lake Travis, Marshall's Point, Montechino and North Shore Colony. We also serve Jonestown, The Hollows, Point Venture, Northshore on Lake Travis, Bee Cave, Hudson Bend, Leander, Cedar Park and Georgetown, with a second shop in Lakeway, and we serve homes across Greater Austin. Our Lago Vista shop is at 20811 Dawn Dr, Unit 706, Lago Vista, TX 78645. Call (512) 662-2949 Monday to Friday, 7:30 a.m. to 8 p.m., or Saturday, 8 a.m. to noon.

Our Liberty Pump Service Process

Four steps, from the first call to a full test cycle.

You Call or Text

Tell us what the pump or alarm is doing and whether water is backing up. For a sewage ejector or grinder pump, keep the water off. A $65 trip charge applies and is credited toward the work.

1

We Find the Cause

The plumber checks the power, float switch, impeller, check valve and discharge line to find out why the pump is not keeping up.

2

You Get Options in Writing

We show you what we found and give you a written price for each option, repair or replacement, before any work starts.

3

We Fix It and Test It

We make the repair or replacement, then run the pump through a full cycle to confirm the float responds, the pump moves water out and it shuts off the way it should.

4
FAQ

Liberty Pump FAQs

Straight answers from a local plumber about Liberty sump, sewage ejector and grinder pumps in Lago Vista and around Lake Travis.

What Our Customers Say

Read what homeowners say about working with Real Texas Plumbing.

Talk to a Local Plumber About Your Liberty Pump

Licensed, insured and family-owned in Lago Vista since 2018. You get a written price before we start.

Call us